Nyhet 06.08.09. - Ny motorvinge fra Dudek - NUCLEON

Så har Dudek klart det igjen. De har tatt det beste fra Plasma, Reaction og Synthesis og blandet dette med en masse nyutvikling og laget Nucleon.

Pris 25,500,-

Ny i 2009!! For deg som har flydd en del med motor og setter pris på ytelse og sikkerher leser du om din nye vinge!! En vinge som er stabil og sikker både på liten og stor hastighet. Vingen har vært testet siden 2007 og er endelig satt i produksjon. Vingen er sertifisert til EN C. Den er blitt enda mer lettstartet enn Synthesis. Det skrytes av at i rette forhold trenger du ikke engang holde i risere..

* inkluder alt utstyr: tom motor (uten bensin), seletøy, nødskjerm, vinge og pilot med utstyr

DESIGN EGENSKAPER - På engelsk!

The Nucleon incorporates a number of proven and some novel features improving flight comfort and performance.

A set of design tools called Canopy Shape Guard effectively stiffens the wing along its entire span, practically eliminating any lateral canopy movement.

CSG oversees three crucial factors:

1. It forms the canopy so that it becomes a shape as close to the original design as possible, with equally distributed tension.
2. No more irregular shape and bulging cells! (sadly, still quite often noticed on paragliders from some "leading companies").
3. It stabilizes the canopy in flight. Any wing that behaves like an accordion is detested by pilots and suffers fatal losses in performance.
4. It makes the canopy durable. It is widely known that PPG pilots are keen on overloading their wings, seeking more speed and stability.
5. Initially it works, but soon deformations of excessively loaded fabric do occur. The most dangerous ones can be seen as lateral folds on the wing's upper
6. surface, located between suspension line rows. With the Nucleon that danger is practically eliminated.

CSG consists of several subsystems:

• VS (V-shaped Supports) - densely placed diagonal supports bolster each rib on both sides (most wings have only one-sided supports). Their size and shape make sure that no lateral folds will occur - a vital point in preserving laminar airflow.
• RSS (Reinforcing Strap System) - an independent reinforcement net on lower surface, strengthening and stiffening the whole canopy.
• OCD (Optimized Crossports Design) - The intercellar openings have carefully designed shapes and are optimally placed between stress lines in the ribs.
• CCS (Closed Cell Structure) - This is a number of closed cells in the most important places. Its goal is to hinder the backflow from the cells out, thus facilitating their refill and canopy recovery in case of a collapse.

The only CSG flaws are the increase in weight (about 1 kg), material- and labour consumption, and of course overall cost. Yet it is well worth the sweat, as in turn we get a no-compromise product of highest performance and quality, able to keep its original parameters for a long, long time.

NEW! - ALC -The Nucleon is our first paraglider equipped as standard with ALC, an alternative control system. The new system replaces previous TST, and is based on a solution developed by Michel Carnet on his ReAction since 2007, at the World Championship in China.
ALC allows for aggressive, yet effortless, turns on full speed without influencing its reflex aerofoil. It is especially important in the case of bigger canopies, inherently haunted by significant steering forces and low agility.
The new steering component is a red ball, easily positioned to fit various harness hang-points and personal preferences. In addition, the ALC ball and line are routed in such a way to be easy to use without the risk of entanglement with risers or other parts. Of course you can use just the standard brakes if you wish, ignoring the ALC ball.

The current version of ALC is honed to perfection by long trials of numerous designs. All signs show that it will soon become a standard in alternative PPG control systems.

NEW! - Effective brakes. Classic steering with brakes has been redesigned too, rendering it even more effective than in our earlier paragliders. The Nucleon's brakes work even at fastest trim and speed settings, while at slow speeds their action is simply perfect.

NEW! - TEA (Torque Effect Adjuster) - The task of this feature is to counteract the effect of engine torque, that tends to make the paraglider turn in the direction opposite to the propeller's rotation. TEA balances the torque by adjusting the length of some wingtip lines, and it can be adjusted to match you specific combination of paramotor/propeller. Simple to use, effective and easy to toggle on & off in the air.

NEW! - Ball-bearing pulleys. As a first world company we have decided to use ball-bearing pulleys as standard on our paragliders, in order to minimize speed-system friction.

NEW! - Speed system cord. Our current speed system cord is a new, thick-woven pattern. It does not fray, does not stretch and perfectly fits our new pulleys.

NEW! - Brake handles. Our new brake handles feature a new look, they swivel, with Easy Keeper (docking system using strong neodymium magnets) and finally, with TCT (Triple Comfort Toggle) - an easy conversion from hard through medium to soft brake handles.

 

Trim usage information

 
 

Note!
When ordering Nucleon it would be prudent to state propeller's turn direction (looking from behind toward flight) and harness hangpoints (high or low). Knowing these facts we will be able to prepare risers beforehand (the torque eliminating TEA line will be placed accordingly, as well as steering balls and handles).

If we don't have any information, paraglider is configured for low hangpoints (ALC and steering lines) and clockwise propeller (TEA). Please make sure this is your configuration, or change the setup according to your needs.